D-Link DI-206 - Manual (Page 77)

DI-206 ISDN Remote Router
Configuration and Management 65
The parameters are described below:
•
IP Address – This is the base (starting) address for the IP pool of
IP addresses to be assigned.
•
Range – This is the range of contiguous, IP addresses, above the
base IP Address above. In the above example, the IP addresses
assigned host computers as they come onto the network would be
202.93.47.1, 202.93.47.2 … 202.93.47.100.
•
Netmask – This mask informs the client, how the destination IP
address is to be divided into network, subnet and host parts. The
netmask has ones in the bit positions in the 32-bit address which are
to be used for the network and subnet parts, and zeros for the host
part.
•
Gateway – This specifies the Gateway IP Address that will be
assigned to and used by the DHCP clients.