D-Link DI-206 - Manual (Page 143)

DI-206 ISDN Remote Router
Configuration and Management 131
The parameters are described as follows:
•
Interface – The ISDN B-channel to be tested.
•
Phone Number – The phone number that will be dialed by the
ISDN Interface. Please ensure that a modem answers the phone on
the other end.
•
Connection Test – Position the cursor over this item and press
to begin the test. The router will dial the phone number
defined above, try to establish a valid link with the answering ISDN
device and hang up. This test can only be performed if the Interface
is disabled in the Interface Configuration, ISDN submenu.
•
Dial Out – Press to begin the test. The router will dial the
phone number above and negotiate a connection with the answering