D-Link DI-206 - Manual (Page 55)

DI-206 ISDN Remote Router
Configuration and Management 43
The parameters are described below:
•
SNMP Community String – This community string is a user-
defined identifying name used to group together some arbitrary set of
SNMP application entities managed by the network manager.
•
Access Right – This element of the set {Read Only, Read/Write}
is called the SNMP access mode. If the SNMP Community String
has an Access Right of Read/Write, then that Community String is
available as an operand for the get, set, and trap operations.
Otherwise, if the Community String’s corresponding Access Right is
Read Only, then it is available as an operand for the get and trap
operations only.
•
Status – This validates or invalidates the use SNMP Community
String, by setting the string to Valid or Invalid. Note that setting the
use of the string to Invalid is the same as removing the string,
however, the string remains so as to be validated at an appropriate
time.