D-Link DI-206 - Manual (Page 38)

DI-206 ISDN Remote Router
26 Configuration and
Management
Note that once you are in the Main Menu, if there is no activity for
more than 5 minutes, the router will automatically log you out. Your
first endeavor should be to increase the ‘timeout’ time by adjusting the
appropriate value in the System Information sub-menu.
The router can also be configured remotely through a LAN or ISDN
connection by using the included Router Configuration Utility or Telnet.
However, if you wish to do this, the console program must first be used
to initially configure the relevant port on the router. Please see Step 7 -
Initial Configuration of the Router on page 20 of this manual for
more detailed information.
Console Program Main Menu
The Main Menu is shown below.