D-Link DI-206 - Manual (Page 159)

DI-206 ISDN Remote Router
PROM System Configuration 147
Items listed in the above menu are described as follows:
•
Software Update Control – This toggles disable and enable.
•
Software Update Mode – This specifies downloading the image
file from a Network server on the local LAN.
•
Boot Protocol – This setting is for a local network download and
has two options TFTP and BootP&TFTP.
•
TFTP – A File Transfer Protocol. Using this setting assumes all
other items on this screen have been filled out.
•
BootP&TFTP – BootP is run first and sends your router IP
Addresses for the TFTP server and the router, and tells the
router the path to the software update (image file). Then TFTP
will be used to download the image file.
•
Boot Server IP Address – This specifies the IP address of the
server to be used to download the image file.