D-Link DI-206 - Manual (Page 157)

DI-206 ISDN Remote Router
PROM System Configuration 145
TCP/IP Parameters Configuration
The parameters are described as follows:
•
Interface – The LAN interface must use Ethernet/Fast Ethernet and
is displayed here. This setting cannot be adjusted.
•
IP Address – This is the router’s IP Address for the LAN interface.
•
Subnet Mask – This mask shows how the LAN is to be divided
into network, subnet, and host parts.
•
Default Gateway – This is the default gateway for the LAN. If this
router will be the default gateway for the LAN, then the address
should be 0.0.0.0.
•
Send BootP request upon power up – If set to Yes, when the
router boots up, it will attempt to acquire the path to the image file,
the TFTP server IP Address and the routers own IP Address.