beautypg.com

D-Link DI-206 User Manual

Page 35

background image

DI-206 ISDN Remote Router

Installation

23

Still in Network Configuration, IP Configuration submenu

from Step 2 above, choose IP Stack Configuration, LAN.

Enter a valid IP address for the LAN in the first item. You may

also enter a Netmask if you wish. For more information about IP
Addresses and Subnet masks, please refer to Appendix B, “IP
Concepts
.”

Position the cursor on the Save option at the bottom of the

screen and press to save the new setting.

Choose EXIT in the sub-menus to return to the Main Menu.

4. Enable the Telnet/Discovery function on the router.

From the Main Menu choose Advanced Functions .

Choose the Telnet/Discovery Enable option and then Enable

Telnet State.

Position the cursor on the Save option at the bottom of the

screen and press to save the new settings.

Choose Exit in the sub-menus to return to the Main Menu.

The router can now be accessed via the LAN by Telnet, the Web-
based DI-206 Router Configuration Utility (included with the router)
and other SNMP management applications.

If you have any questions regarding the settings you made or other
settings in the submenus, please refer to the next chapter
Configuration and Management.”