beautypg.com

D-Link DI-206 User Manual

Page 107

background image

DI-206 ISDN Remote Router

Configuration and Management

95

Local IP – This is a single, local IP Address that is not valid on the

Internet.

State – Enables or disables this entry.

Static NAPT

This screen (below) is how the NAT IP Pool appears, if Static NAPT
was chosen for the Translation Mode parameter. Each entry in this
configuration can be used to map a global address and port to a local
address and port. Notice that the global address will be the external IP
address of the global interface.

The parameter not explained in the previous sections is described as
follows: