D-Link DI-206 - Manual (Page 165)

DI-206 ISDN Remote Router
Using RADIUS Authentication 153
Items in the above submenu are described as follows:
♦
RADIUS State – Enables or disables RADIUS.
♦
Type – Refers to the type of external password protocol. Currently,
only Radius is supported.
♦
Server IP Address – This is the IP Address of your UNIX or NT-
based Radius server.
♦
Port – The port number for the Radius server. The standard port
number specified by RFC 1700 is 1812 (shown above).
♦
Key – This is a shared secret used to identify the DI-206 as a valid
Radius client.
The Key password should be stored in the client file in the
RADIUS server’s /etc/raddb directory. Lines of the form