Microphone mixing, Before connecting a microphone, 1 connect your microphone to the mic jack – Aiwa NSX-V72 User Manual
Page 46: 3 adjust the voiume and tone of the source, 5 adjust the echo with the digital echo controi, To record microphone sound mixed with source sound, When not using the microphones, Recommended microphone, Microphone mixing 4 5
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
KARAO
I
MICROPHONE MIXING
4
5
Two microphones (not supplied) can be connected to this unit,
allowing you to sing along to music sources.
Use a microphone with a mini plug (03.5 mm, Vs inch).
Before connecting a microphone
Set the MIC MIXING control to MIN.
1 Connect your microphone to the MIC jack.
2 Press one of the function buttons to seiect the
source to be mixed, and piay the source.
3 Adjust the voiume and tone of the source.
4 Adjust the microphone voiume with the MiC
MiXING controi.
The volume ot both microphones is adjusted simultaneously.
5 Adjust the echo with the DiGiTAL ECHO controi.
To record microphone sound mixed with source sound
Follow the procedure for recording from the source (pages 34 to
36).
The SYNCHRO DUBBING button cannot be used for mixing
recording.
When not using the microphones
Set the MIC MIXING and DIGITAL ECHO controls to MIN and
remove the microphones from the MIC jacks.
• When a connected microphone is used, the DSP SURROUND
system is automatically canceled.
• If the microphone is held too near the speakers, a howling sound
may be produced. In this case, hold the microphone away
from the speakers, or decrease the sound level using the MIC
MIXING control.
• If sound through the microphone is extremely loud, it may be
distorted. In this case, turn the MIC MIXING control toward
MIN.
Recommended microphone
The use of a unidirectional type microphone is recommended to
prevent howling. Contact your local Aiwa dealer for details.
46