Aiwa NSX-V72 - Manual (Page 22)

RADIO R
■
SET
PRESETTING STATIONS - 0
The unit can store a total of 32 preset stations. When a station
is stored, a preset number is assigned to the station. Use the
preset number to tune in to a preset station directly.
1 Press the TUNER/BAND button to select a band,
and press the DOWN or UP button to
select a station.
2 Press the II SET button to store the station.
A station is assigned a preset number from 1 in consecutive
order for each band.
DISPLAY
® The frequency
® The preset number
@ The preset numbers
The selected preset number flashes.
Note that only the first 20 numbers are displayed, even if
stations 21 to 32 have been stored.
3 Repeat steps 1 and 2.
The next station will not be stored if a total of 32 preset stations
have already been stored for all the bands.
□
PRESET NUMBER TUNING
ICLEARS
J ^
1
-IISET
TUNER
BAND
iilllfi»#«
lliliilltii
p 11
C D O C D O
5 6 7 8
o o a o
+10
^1
Use the remote control to select the preset number directly.
1 Press the TUNER/BAND button to select a band.
2 Press the numeric buttons to select a preset
number.
Example:
To select preset number 25, press the +10, +10 and 5 buttons.
To select preset number 10, press the +10 and 0 buttons.
DISPLAY
® Preset number
@ Frequency
Selecting a preset number on the main unit
Press the TUNER/BAND button to select a band. Then, press
the -<► DIRECTION/PRESET button repeatedly.
Each time the button is pressed, the next highest number is
selected.
To clear a preset station
Select the preset number of the station to be cleared. Then, press
the ■ CLEAR button, and press the II SET button within 4
seconds.
The preset numbers of all other stations in the band with higher
numbers are also decreased by one.
22