Basic recording, Preparation, To start recording with the remote control – Aiwa NSX-V72 User Manual
Page 34: Inserting blank spaces, 2 press the ii button to resume recording, Basic recording 4
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
RECORDING
BASIC RECORDING
4
5
3
2
This section explains how to record from the tuner, CDs, or
external equipment. If you want to record from tapes, see pages
36 to 38.
Preparation
• Wind up the tape to the point where recording will start.
• Use normal (type I) and СгОг (type II) tapes for recording.
1
Insert the tape to be recorded on into deck 2.
Insert the tape with the side to be recorded first facing
the foreground and the exposed side down.
2
Press the REV MODE button to select the reverse
mode.
To record on one side oniy, turn on II.
To record on both sides, turn on ИЗ or СИЗ.
3
Press the DOLBY NR button to turn Dolby NR on
or off.
To record with DOLBY NR, turn on DO NR.
To record without DOLBY NR, turn off □□ NR.
4
Press one of the function buttons and prepare
the source to be recorded.
To record from a CD, press the CD button and ioad the
disc(s).
To record from a radio broadcast, press the TUNER button
and tune in to a station.
To record from the connected source, press the VÌDEO/
AUX button and play.
5 Press the • REC/REC MUTE button to start
recording.
When the selected function is CD, playback and recording
start simultaneously.
To stop recording, press the ■ button.
To pause recording, press the II button. (Applicable when the
source is TUNER, ViDEO/AUX.) To resume recording, press
again.
To start recording with the remote control
First press the */0 REC/REC MUTE button, and then press the
button within 2 seconds.
INSERTING BLANK SPACES
Insertion of 4-second blank spaces enables activation of the
Music Sensor function. (Applicabie when the source is TUNER
or ViDEO/AUX.)
1 Press the • REC/REC MUTE button during recording or
while in recording pause mode.
on the display flashes for 4 seconds and the tape
runs without recording. After 4 seconds, the deck enters the
recording pause mode.
2 Press the II button to resume recording.
To insert a blank space of less than 4 seconds, press the •
REC/REC MUTE button again while
is flashing.
To insert blank spaces of more than 4 seconds, after the
deck enters recording pause mode, press the • REC/REC MUTE
button again. Each time the button is pressed, a 4-second blank
space is added.
34