Basic operations, Inserting tapes, Playing back a tape -> h – Aiwa NSX-V72 User Manual
Page 30: 2 press the ◄► button to start play, Display, When tapes are inserted to both decks
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
TAPE PLAYBACK
I
BASIC OPERATIONS
TAPE/ —
DECK 1/2
II
DOLBY NH■
AEJECl ■
REV MODE■
izi
■^►DIRECTION-
PRESET
■ AEJECT
□
REV MODE
(DECK 2)
□C
n
|
i
_
n n II n
U
I ' u u
r U
o
C
”/
I ! I f L C
I
INSERTING TAPES
• On deck 1, tapes are always played back on both sides.
On deck 2, you can select a reverse mode to play back one or
both sides.
• Use normal (type I), Cr02 (type II) or metal (type IV) tapes for
playback.
Press the TAPE button and press the A EJECT mark
to open the cassette holder. Q
Insert a tape with the exposed side down and with the side to be
played first facing the foreground. Push the cassette holder to
close.
To select a reverse mode (deck 2 only) -» Q1
Each time the REV MODE button is pressed, the reverse mode
changes.
To play one side only, turn on H.
To play from front side to back side once only, turn on Z).
To play both sides repeatedly, turn on CZ).
• When tapes are loaded in both decks, the ZJ on the display
indicates Continuous Play. (See page 32.)
PLAYING BACK A TAPE -> H
Insert a tape.
1 Press the DOLBY NR button and turn Dolby NR
on or off to match the playback tape.
Eor tapes recorded with DOLBY NR, turn on □□ NR.
Eor tapes recorded without DOLBY NR, turn off □□ NR.
2 Press the ◄► button to start play.
DISPLAY
® Playback side of the tape
t>: The side facing the foreground (the front side) is being
played.
-O: The side facing the background (the back side) is being
played.
@ Tape counter indicates the tape running length.
When tapes are inserted to both decks
Press the TAPE button to select a deck at first.
The selected deck number is displayed.
To stop play, press the ■ button.
To pause play(deck 2 only), press the II button. To resume
play, press again.
To change the playback side, press the ■<► DIRECTION/
PRESET button in play or pause mode.
To fast forward or rewind, press the or ►► button in stop
mode. Then press the ■ button to stop the tape.
To start play when the power is off (Direct Play Function)
Press the TAPE button. The power is turned on and play of the
inserted tape begins.
To set the tape counter to 0000
Press the ■ CLEAR button in the stop mode.
The counter is also set to 0000 when the cassette holder is
opened.
30