Aiwa NSX-V72 - Manual (Page 26)

■■
—
BBHi
BASIC OPERATIONS
Selecting a track with the remote control Q
1 Press one of the DISC DIRECT PLAY buttons to select a disc.
2 Press the numeric buttons and the +10 button to select a
track.
Example:
® To select the 25th track, press the +10, +10 and 5 buttons.
® To select the 10th track, press the +10 and 0 buttons.
Selected track starts to play and continues to the end of that
disc.
Replacing discs during play
While one disc is playing, the other discs can be replaced without
interrupting play.
1 Press the DISC CHANGE button.
2 Remove the discs and replace with other discs.
3 Press the ^ OPEN/CLOSE button to close the disc
compartment.
' When loading an 8-cm (3-inch) disc, put it onto the inner circle
of the tray.
' Do not place more than one compact disc on one disc tray.
' Do not tilt the unit with discs loaded. Doing so may cause
malfunctions.
DISC------
CHANGE
±OPEN/-
CLOSE
iZ
RANDOM
REPEAT
RANDOM PLAY
All the tracks on the selected disc or on all the discs can be
played randomly.
Press the RANDOM button on the remote control.
To cancel random play, press again.
• Even if the ◄◄ button is pressed, a previously played track
cannot be skipped. The unit returns to the beginning of the
current track only.
• Direct selection of the tracks with the numeric buttons is not
possible.
REPEAT PLAY
All the tracks on the selected disc or on all the discs can be
played repeatedly.
Press the REPEAT button on the remote control.
To cancel repeat play, press again.
26