Rear panel, Redray player operation guide – RED REDRAY PLAYER User Manual
Page 8
![background image](/manuals/709204/8/background.png)
COPYRIGHT © 2014 RED.COM, INC
REDRAY PLAYER OPERATION GUIDE
955-0017, REV-D | 8
REAR PANEL
9
7
10
1
2
4
3
8
11
5
6
#
REAR PANEL ELEMENT
DESCRIPTION
1
802.11 Connector
For use with the included 802.11 Antenna
2
AUDIO OUT
(HDMI 1.3 connector)
Audio output (Stereo and 5.1 Ch), 24-bit, 48kHz uncompressed LPCM
3
HDTV OUT
(HDMI 1.3 connector)
Video output at up to 12-bit 4:2:2 YCbCr, 1920 x 1080p resolution
4
USB/E-SATA
Reserved for future use
5
NETWORK
(RJ45)
(Upper) GigaBit Ethernet network interface port
(Lower)
2
Reserved for future use
6
VID A OUT
(HDMI 1.4 connector)
Video output at up to 12-bit 4:2:2 YCbCr, 4096 x 2160p resolution
7
VID B OUT
(HDMI 1.4 connector)
Video output at up to 12-bit 4:2:2 YCbCr, 4096 x 2160p resolution
8
VID C OUT
(HDMI 1.4 connector)
Video output at up to 12-bit 4:2:2 YCbCr, 4096 x 2160p resolution
9
VID D OUT
1
(HDMI 1.4 connector)
Video output at up to 12-bit 4:2:2 YCbCr, 4096 x 2160p resolution
10
GPI
2
Reserved for future use
11
AC Power Switch and
Connector
IEC 3-pin, 100-240 VAC, 50-60 Hz, 1A max. at 100VAC
1. This is the primary 4K connector. Use this connector when connecting the REDRAY PLAYER to a 4K display using a single HDMI cable.
2. These connectors have been disabled on the REDRAY Player.
Rear Panel