Load movies from usb and sdhc cards, Redray player operation guide – RED REDRAY PLAYER User Manual

Page 14

REDRAY PLAYER OPERATION GUIDE

955-0017, REV-D | 14

LOAD MOVIES FROM USB AND SDHC CARDS

1. Ensure the REDRAY is powered on.
2. Connect a USB 2.0 flash drive or SDHC card that contains the movies to be loaded to the REDRAY.
3. Once connected, the REDRAY automatically uploads all movies located in the “Content” folder on the flash

drive or SDHC card to the internal hard drive. It takes about 20 minutes to load a two (2) hour movie.
While uploading, a progress bar with the movie name displays on the screen. After all movies are uploaded,

they will appear on the INTERNAL DRIVE in alphabetical order.

4. Remove the USB flash drive or SDHC card.

NOTE: If the REDRAY does not upload the movies from your USB flash drive or SDHC card, ensure that all

desired movies are located on the media card or flash drive in a folder named “Content”.
NOTE: DO NOT remove a USB flash drive or the SDHC card while loading movies.
NOTE: Only movies that have a valid license will play on the REDRAY.
NOTE: The REDRAY will override any media on the INTERNAL DRIVE if you attempt to load a movie with the

same name.

Load Movies