Copy encoded content to usb and sdhc cards, Copy encoded content to usb and sdhc cards 61, Copy encoded content to usb and sdhc – RED REDRAY PLAYER User Manual

Page 61: Redray player operation guide

REDRAY PLAYER OPERATION GUIDE

955-0017, REV-D | 61

COPY ENCODED CONTENT TO USB AND SDHC CARDS

After you’ve encoded your content, follow the instructions below to copy your content to a USB 2.0 flash drive

or SDHC card:
NOTE: When copying encoded content to a USB 2.0 flash drive or SDHC card, the maximum recommended

media size for the flash drive and SDHC card is 32GB.
1. Connect a USB 2.0 flash drive or SDHC card to your computer.
2. Ensure that the flash drive or SDHC card is formatted as MS-DOS FAT (for Mac) or FAT32 (for Windows).

NOTE: For more information on formatting flash drives and SDHC cards, go to

“Format USB and SDHC

Card” on page 59

3. Create a new folder labelled Content on your flash drive or SDHC card.

NOTE: When you connect a flash drive or SDHC card to the REDRAY, the REDRAY only loads movies from

the Content folder. If the movie is not in the Content folder, the REDRAY will not load the movie.

4. Copy the entire output folder of the encoded clip into the Content folder on the flash drive or SDHC card.

NOTE: DO NOT compress or zip the Content folder.
NOTE: The entire output folder must be copied in tact onto the flash drive or SDHC card in order for the en-

coded content to play on the REDRAY. DO NOT modify or delete any files or subfolders in the output folder.