Date and time, Redray player operation guide – RED REDRAY PLAYER User Manual

Page 24

REDRAY PLAYER OPERATION GUIDE

955-0017, REV-D | 24

6. After entering the wireless settings, select Accept.

The REDRAY communicates with the router for about 10 seconds to obtain your network IP address. You

cannot select anything on the REDRAY on-screen display during these 10 seconds.
After the REDRAY obtains the IP address, the panel on the right side of the screen closes and the IP ad-

dress displays on the NETWORK screen.
NOTE: If the REDRAY is connected to a router through an Ethernet cable and a wireless connection, two sets

of IP addresses display on the NETWORK screen.

DATE AND TIME

View and modify your date, time, and time zone settings in the DATE AND TIME sub-menu.
Change your settings by following the instructions below:
1. Navigate to SETTINGS > DATE AND TIME.
2. Select Date and enter today’s date (MM/DD/YEAR).
3. Select Time and enter the time.
4. Select Timezone and choose your location to allow proper synchronization with Universal Time based Digital

Rights Management video services.

Wireless Settings

DATE AND TIME