RED REDRAY PLAYER - Manual (Page 21)

REDRAY PLAYER OPERATION GUIDE
COPYRIGHT © 2014 RED.COM, INC 955-0017, REV-D | 21
4. In the pop-up window, select Yes.
The REDRAY reboots and is reset to the factory defaults.
NETWORK
You can connect your REDRAY to your network using an Ethernet cable or a wireless connection. For optimal
media download speeds, connect to your network using an Ethernet cable, and not a wireless connection.
Configure your network settings through the NETWORK sub-menu. After your network settings are configured,
the current Ethernet and wireless IP addresses are displayed in the NETWORK sub-menu.
NOTE: When connecting to a network, you can use either an Ethernet or a wireless connection, or both an
Ethernet and a wireless connection, provided that both connections are to the same network router. DO NOT
attempt to connect to more than one (1) network at a time.
CONNECT WITH ETHERNET
The default and recommended setting for Ethernet is AUTOMATIC (DHCP). In this mode, the REDRAY receives
its IP Address from your network router.
CONNECT WITH DHCP
1. Navigate to SETTINGS > NETWORK.
Confirm Factory Reset
NETWORK