Keri Systems BioPointe Users Manual - Manual (Page 63)

Interfacing with Door Controllers
62
Configuring the BioPointe to work with Keri System Controllers
The BioPointe has to be configured with the necessary settings to assure operation with Keri System
controllers. In the BioPointe Central software, follow the steps below:
Step 1: Go to Device Management System.
Step 2: Under the Wiegand selection box, select the appropriate format to work with the door controller. E.g.
26 Bits Vendor 1.
Step 3: Under the Wiegand Out selection, select "Enable"
Table 1: Summary of necessary settings in the BioPointe
Property in TDM Setting
Wiegand Format E.g. 26 Bits Standard, 26 Bits Vendor 1, etc
Wiegand Out Enable