3 applying power – Keri Systems BioPointe Users Manual User Manual
Page 11
Getting Started
10
2.3 Applying Power
Safety instructions
It is necessary to take special precautions to avoid the introduction of hazards while operating, installing,
maintaining, transporting or storing the device.
The power supply that is used should have an output voltage of between 12V to 24VDC rated at 1.0A (please
refer to the Technical Specifications for more details).
[WARNING!]
Make sure the mains supply voltage rating of the power adapter is suitable for the supply voltage in
your country before you power on. When in doubt, you should consult your local representative for
advice.