Keri Systems BioPointe Users Manual - Manual (Page 31)

Administering the BioPointe
30
Lift up your finger when you hear the
series of beep sound and place it back on
the sensor when it lights up again.
This is for the second capture.
a) If the 2
nd capture is successful, the 1 st LED will
blink green briefly as shown in 5(a). The
enrollment is successful. Operation will return to
normal mode.
b) If the 2 nd capture is not successful, the 1 st LED
will blink red briefly as shown in 5(b). Operation
will return to normal mode.
5
GREEN
→AMBER
5a
5b
RED
→AMBER
2nd capture not successful.
enrollment fails.