Keri Systems BioPointe Users Manual - Manual (Page 28)

Administering the BioPointe
27
4.3 Using the Keypad
The following diagram shows the BioPointe keypad. There are three function keys. The first
function key, is used for performing Quick Search and One-To-Many matching. For more
detailed information in using this key, please refer to Chapter 5 on "Using the BioPointe".
While the configuration of the device and the enrollment of authentication properties can be totally
performed from the interfacing software, the BioPointe does also cater to some minimal level of
standalone capabilities. This is provided through the use of two other function keys that serve to
configure basic parameters and to enroll authentication properties locally.
The second, and the third function keys are used respectively for such configuration
and enrollment.
KEY Purpose
Quick Search &
One-To-Many
matching
Configuration
Enrollment and
Deletion
*
Clearing keys
previously pressed
#
For "confirming" to
a key value while in
the administration
mode
Parts of the keypad
1
4
7
2
5
8
3
6
9
0 * #
LED 1
LED 2
LED 3
Function keys,
F1, F2 and F3
ENTER
CLEAR