Carrier RTU OPEN 11-808-427-01 - Manual (Page 42)

Start-up
36 RTU Open
To start up the RTU Open, you need one of the following user interfaces to the controller. These items let you
access the controller information, read sensor values, and test the controller.
This interface... Provides a...
i-Vu Open software Permanent interface
Field Assistant software -
runs on a laptop connected to controller's Local Access port 1
Temporary interface
Virtual BACview software -
runs on a laptop connected to controller's Local Access port 1, 2
Temporary interface
BACview6 Handheld keypad/display device -
connects to controller's Local Access port 1, 2
Temporary interface
BACview6 keypad/display device
connected to controller's Rnet port 2
Permanent interface
1 Requires a USB Link (Part #USB-L).
2 See the BACview Installation and User Guide for instructions on connecting and using the above items.
Start-up