beautypg.com

Take photos and select photo options – Juniper Systems Allegro 2 User Guide User Manual

Page 80

background image

76

Allegro 2 Rugged Handheld Owner’s Manual

Take Photos and Select Photo Options

Press the + C keys to turn the camera on. Frame the

photo as desired and press the action key or the return

key . A square yellow box is shown indicating that the

camera is focusing. Press enter when you are ready to take

the picture. A screen like the following is shown for a few

seconds. Hold the handheld steady until you hear a click,

indicating that the photo has been taken.

Note: The built-in accelerometer is used to detect the

handheld orientation when the picture is snapped and save

the image in the right orientation.
While the photo is being saved, a disk symbol is shown

briefly. The full photo is then shown on the screen.

Photo Options

Select the Menu soft key to see a list of options for a

particular photo. (The photo must appear on the screen.)