Juniper Systems Allegro 2 User Guide - Manual (Page 70)

66 Allegro 2 Rugged Handheld Owner’s Manual
Collect Waypoint Data
From the main JSNav screen select the waypoint icon to
open the Collect Waypoint screen.
„
To collect a waypoint, select the waypoint icon at
the bottom of the screen. Position information for the
waypoint is recorded.
„
Select the edit icon to add or edit the name,
description, notes, and file type for this waypoint.
„
To navigate back to the waypoint you just collected,
select the compass icon. A rotating compass is shown.
Walk in the direction of the red arrow. The distance shown
decreases as you get closer. Text saying Arrived is shown
and you hear a beep (if audio notifications are set up)
when you reach the navigation distance threshold set up
in GPS Settings.