beautypg.com

Juniper Systems Allegro 2 User Guide User Manual

Page 10

background image

6

Allegro 2 Rugged Handheld Owner’s Manual

Insert the stylus with the attached tether through this

loop and tighten the loop.

2. Place the stylus into the holder on the hand strap.

Perform Set Up

1. Press the power key . The handheld powers on and

begins the startup process. A splash screen is shown that

includes a progress indicator at the bottom.

2. A Microsoft

®

Windows Embedded Handheld screen is

shown.

3. The Update Time screen appears. Adjust the time zone,

date and time if necessary and tap OK.

4. You might be asked to restart the handheld to complete

installation.

5. The Home screen appears (the layout varies by model).