beautypg.com

Serial device (com) control panel – Juniper Systems Allegro 2 User Guide User Manual

Page 55

background image

Ch 4 Bluetooth Wireless Communication

51

Note: If you are unsure whether or not the device

requires a passcode and if one has already been

assigned to the device, see the user documentation

that came with the device.

5. You can adjust the Bluetooth settings as needed.

Serial Device (COM) Control Panel

To set up a Bluetooth COM port, follow these steps:
1. Select

COM Port, GPS, RFID from the Bluetooth dialog

box. The following Bluetooth COM configuration screen

is shown. Select Discover Devices.

2. After the handheld searches, a list of discovered devices

is shown. Select the device you want to connect to from

the list and tap Connect. A COM port is automatically

assigned for the device. You can change it to another

COM port if desired.

3. The Allegro 2 automatically tries to discover the PIN. You

might be required to enter a PIN.

You should now be connected to the COM device.