Introduction – EVCO EPU2LXP1CH User Manual
Page 5
EVCO S.p.A.
c-pro 3 micro and c-pro 3 kilo | Hardware manual ver. 1.0 | Code 114CP3UKE104
page 5 of 62
1. INTRODUCTION
1.1. Introduction
c-pro 3 micro and c-pro 3 kilo are two families of programmable controllers.
The family consists of:
-
programmable controllers (c-pro 3 micro, c-pro 3 micro+, c-pro 3 kilo and c-pro 3 kilo+)
-
I / O expansions (c-pro 3 EXP micro, c-pro 3 EXP micro+, c-pro 3 EXP kilo and c-pro 3 EXP kilo+).
c-pro 3 micro and c-pro 3 micro+ are available in the following versions:
-
with 4 + 4 digits custom LED display (with function icons) and with a 6 buttons (with preset functions) keyboard made of
silicone rubber integrated in the controller, hereinafter also called “built-in LED versions”
-
blind (they can be used for example with an user interface such as Vgraph, Vtouch, Vroom or Vcolor), hereinafter also
called “blind versions”.
c-pro 3 kilo and c-pro 3 kilo+ are available in the following versions:
-
with 128 x 64 pixel single colour LCD graphic display (black with rearlighting through white LEDs) and with a 6 buttons (with
preset functions) keyboard made of silicone rubber integrated in the controller, hereinafter also called “built-in LCD versions”
-
with 4 + 4 digits custom LED display (with function icons) and with a 6 buttons (with preset functions) keyboard made of
silicone rubber integrated in the controller, hereinafter also called “built-in LED versions”
-
blind (they can be used for example with an user interface such as Vgraph, Vtouch, Vroom or Vcolor), hereinafter also
called “blind versions”.
Some integrate an unipolar stepper electronic expansion valves driver.
The I/O expansions are available in blind version.
Through the development environment UNI-PRO 3 (to order separately) it is possible to realize the application software and through a
commun USB cable it is possible to program the controllers.
The devices look in case 4 DIN modules; installation is in electrical panel, on DIN rail.
Through a common USB peripheral it is possible to make the upload and the download of the configuration parameters.