All eeprom all rtc – EVCO CT1SA0040101 User Manual

Page 28

Text mode
Original mode

Stop leavening specifications
CT1SA0040101
Vers. 1.11

28/36

RTC malfunction
In case of RTC malfunction, an RTC alarm will be shown; the buzzer will sound and the following alarm message will

start blinking on display:

The ongoing cycle will be interrupted and all outputs will be switched off. Press any key to silence the buzzer.
Access the Time Set menu and set the RTC current values: the card will return to the standby mode.

EEPROM alarm
In case of discrepancies in the data saved in Eeprom, an Eeprom alarm will be displayed; the buzzer will sound and the

following alarm message will start blinking on the display:

The ongoing cycle will be interrupted and all outputs will be switched off. Press any key to silence the buzzer. Press the

ON-STANDBY key to reset the card: the card will return to the standby mode.

Note: After an Eeprom alarm occurs, all parameters will be reset to the default values.

ALL EEPROM

ALL RTC