Comtrol AT Command Set Rev A - Manual (Page 220)

AT Commands Reference Manual
Conexant 100722B
6-22
6.2.3 Speakerphone Commands
+VSP - Speakerphone ON/OFF
This command turns the speakerphone ON or OFF
Syntax
+VSP=
Defined Values
Decimal number corresponding to the selected option.
0 The speakerphone function is OFF. (Default.)
1 The speakerphone function is ON.
Reporting Current or Selected Values
Command: +VSP?
Response:
Example: 0 For the default setting.
Reporting Supported Range of Parameter Values
Command: +VSP=?
Response: ( range)
Example: (0,1)
Result Codes
OK = 0 or 1.
ERROR Otherwise, or if not in Voice Mode.