Comtrol AT Command Set Rev A - Manual (Page 112)

AT Commands Reference Manual
Conexant 100722B
3-86
3.2.10 Compatibility Commands
&L - Leased Line Operation
This command requests leased line or dial-up operation. This command is provided for
compatibility only; no mode change is performed, dial-up operation continues. The OK
response is returned for a valid parameter, but no other action is performed. The
parameter value, if valid, is written to S27 bit 2.
Syntax
&L
Defined Values
Decimal number corresponding to the selected option.
0 Requests dial-up operation. Dial-up operation
continues.
Result Codes
OK 0.
ERROR Otherwise.
)M - Enable Cellular Power Level Adjustment
This command is included for compatibility only and has no effect other than returning a
result code.
Syntax
)M
Defined Values
Decimal number corresponding to the selected option.
0 )M0 command.
1 )M1 command.
2 )M2 command.
Result Codes
OK 0 to 2.
ERROR Otherwise.