Comtrol AT Command Set Rev A - Manual (Page 149)

AT Commands Reference Manual
100722B Conexant 3-123
Table 3-16. Result Code Definitions (Continued)
Code Message Meaning
201 +MRR: 38667 The modem has connected to the line at 38667 bps and carrier reporting is enabled. (See S95
and Xn.)
202 +MRR: 41333 The modem has connected to the line at 41333 bps and carrier reporting is enabled. (See S95
and Xn.)
203 +MRR: 42667 The modem has connected to the line at 42667 bps and carrier reporting is enabled. (See S95
and Xn.)
204 +MRR: 45333 The modem has connected to the line at 45333 bps and carrier reporting is enabled. (See S95
and Xn.)
205 +MRR: 46667 The modem has connected to the line at 46667 bps and carrier reporting is enabled. (See S95
and Xn.)
206 +MRR: 49333 The modem has connected to the line at 49333 bps and carrier reporting is enabled. (See S95
and Xn.)
207 +MRR: 50667 The modem has connected to the line at 50667 bps and carrier reporting is enabled. (See S95
and Xn.)
208 +MRR: 53333 The modem has connected to the line at 53333 bps and carrier reporting is enabled. (See S95
and Xn.)
209 +MRR: 54667 The modem has connected to the line at 54667 bps and carrier reporting is enabled. (See S95
and Xn.)
Notes:
1. See Vn for result code selection, i.e., short form (result code) or verbose/extended (result message).
2.
See Wn for extended connect message control.
3. See S95 for extended result code enabling options (which override some Wn commands).
4. See Xn for extended result code subset enabling options.
5.
See \Vn for single line connect message enable options.
6. See +MR for modulation reporting control.
.