Comtrol AT Command Set Rev A - Manual (Page 156)

AT Commands Reference Manual
Conexant 100722B
4-6
4.2 Commands and Parameters
4.2.1 Mode Entry Commands
+FCLASS=1 - Select Facsimile Class 1 Mode
+FCLASS=1 selects the Fax Class 1 Mode. The Fax Class 1 Mode commands and
responses described in this section are applicable when command +FCLASS=1 as shown
in Table 4-1.
+FCLASS=1.0 - Select Facsimile Class 1.0 Mode
+FCLASS=1.0 selects the Fax Class 1.0. The Fax Class 1.0 Mode commands and
responses described in this section are applicable when command +FCLASS=1.0 as
shown in Table 4-1.
4.2.2 Mode Commands
+FAA - Auto Answer Enable
This command enables or disables fax adaptive answer. This command operates
identically to the +FAE command.
Syntax
+FAA=
Defined Values
Decimal number corresponding to the selected option.
0 Disable data /fax auto answer mode. (Default.)
1 Enable data /fax auto answer mode. The modem
determines the calling type and issues DATA
result code (13) if the caller is a data modem or
issues FAX result code (15) if the caller is a fax
modem.