Comtrol AT Command Set Rev A - Manual (Page 192)

AT Commands Reference Manual
Conexant 100722B
5-20
Example:
+FDIS=0,5,0,2,0,0,0,1 =
VR = 0 98 dpi vertical resolution,
BR = 5 14400 bit/s
WD = 0 1728 pixels,
LN = 2 unlimited length
DF = 0 1-D modified Huffman coding,
EC = 0 no ECM,
BF = 0 no BFT,
ST = 1 5 ms scan time.
5.5.4 +FLID= - Local ID String
Write syntax: +FLID=""
Valid value: 20-character ASCII string
Default value: Empty
If FLID is not a null string, it generates a TSI or CSI frame. Table 3/T.30 includes digits
0-9, “+” and space.
If the DCE supports use of Table 3/T.30 only, the response to a +FLID=? command is
“(20) (32, 43, 48-57).” If the DCE supports printable ASCII <, the response is: “(20) (32-
127).” The first “(20)” represents string length: the second (character values)
field reports supported string values.
1. The string is saved in RAM.
2. Non-numeric characters are not filtered out.
3. The string is right justified.
5.5.5 +FCR - Capability to Receive
Write syntax: +FCR=
Valid values: 0 or 1
Default value: 0
+FCR=0 indicates that the DCE will not receive message data. This can be used when the
DTE has insufficient storage. The DCE can send and can be polled for a file.
+FCR is sampled in CCITT T.30 Phase A and Phase D.