Comtrol AT Command Set Rev A - Manual (Page 14)

AT Commands Reference Manual
Conexant 100722B
1-2
1.1.4 ConfigurACE II for Windows Utility Program
The PC-based ConfigurACE II for Windows utility program allows the OEM to
customize SmartACF and SmartACFL modem firmware to suit specific application and
country requirements. ConfigurACE II for Windows allows programming of functions
such as:
• Loading of multiple sets of country parameters
• Loading of NVRAM factory profiles
• Call progress and blacklisting parameters
• Entry of S parameter maximum/minimum/default values
• Limitation of transmit levels
• Modification of factory default values
• Customization of the ATI4 response
• Customization of fax OEM messages
• Enabling of Telephony Extension features
• Direct Mode
This program modifies the hex object code which can be programmed directly into the
system Flash ROM. Lists of the generated parameters can be displayed or printed.
Conexant-provided country parameter files allow a complete set of country-specific call
progress and blacklisting parameters to be selected.
Refer to the ConfigurACE II for Windows software for a detailed description of
capabilities and the operating procedure.
1.2 Reference Documentation
Document Title Document No.
SmartSCM Modem Data Sheet 100490
SmartACF Modem Data Sheet 100488
SmartACFL Modem Data Sheet 100444
SC56D Modem Data Sheet 101098