Comtrol AT Command Set Rev A - Manual (Page 203)

AT Commands Reference Manual
100722B Conexant 6-5
Reporting Current or Selected Values
Command: +VNH?
Response:
Example: 0 For the default setting.
Reporting Supported Range of Parameter Values
Command: +VNH=?
Response: ( range)
Example: (0-2)
Result Codes
OK = 0-2.
ERROR Otherwise.
6.2.2 Voice Commands
+VIP - Voice Initialize All Parameters
This command causes the modem to initialize all voice parameters to their default values.
Syntax
+VIP
Result Code
OK
ERROR
If not in Voice Mode.
+VRX - Start Modem Receive (Record)
This command causes the modem to start the voice reception process.
Syntax
+VRX
Result Codes
OK
ERROR
If not in Voice Mode.