Comtrol AT Command Set Rev A User Manual
Page 117
AT Commands Reference Manual
100722B
Conexant
3-91
+PMHT – Modem-on-Hold Timer
This command controls whether or not the modem will grant or deny a modem-on-hold
(MOH) request as well as setting the MOH Timeout value.
Syntax
+PMHT=
Defined Values
Decimal number corresponding to selected setting.
0
Deny V.92 modem-on-hold Request (Default.)
1
Grant MOH with 10 second timeout
2
Grant MOH with 20 second timeout
3
Grant MOH with 30 second timeout
4
Grant MOH with 40 second timeout
5
Grant MOH with 1 minute timeout
6
Grant MOH with 2 minute timeout
7
Grant MOH with 3 minute timeout
8
Grant MOH with 4 minute timeout
9
Grant MOH with 6 minute timeout
10
Grant MOH with 8 minute timeout
11
Grant MOH with 12 minute timeout
12
Grant MOH with 16 minute timeout
13
Grant MOH with indefinite timeout
Result Codes
OK
0-13 in V.92 Mode (+MS=V92)
ERROR Otherwise
Reporting Current or Selected Values
Command: +PMHT?
Response:
+PMHT:
Example:
+PMHT: 0
For the default setting.
Reporting Supported Range of Parameter Values
Command: +PMHT=?
Response:
+PMHT: (
Example:
+PMHT: (0,1,2,3,4,5,6,7,8,9,10,11,12,13)