Comtrol ES8510-XT User Manual
Page 155
RocketLinx ES8510 and ES8510-XT User Guide: 2000513 Rev. H
Network Redundancy (CLI) - 155
Configuration Using the Command Line Interface (CLI)
Redundant Ring
Create or
configure a Ring
Switch(config)# redundant-ring 1
Ring 1 created
Switch(config-redundant-ring)#
Note: 1 is the target Ring ID which is going to be created or configured.
Super Ring
Version
Switch(config-redundant-ring)# version
default set default to Redundant ring
rapid-super-ring rapid super ring
super-ring super ring
Switch(config-redundant-ring)# version rapid-super-ring
Priority
Switch(config-redundant-ring)# priority
<0-255> valid range is 0 to 255
default set default
Switch(config-redundant-ring)# super-ring priority 100
Ring Port
Switch(config-redundant-ring)# port
IFLIST Interface list, ex: fa1,fa3-5,
cost path cost
Switch(config-redundant-ring)# port fa1,fa2
Ring Info
Ring Info
Switch# show redundant-ring [Ring ID]
[Ring1] Ring1
Current Status : Disabled
Role : Disabled
Ring Status : Abnormal
Ring Manager : 0000.0000.0000
Blocking Port : N/A
Giga Copper : N/A
Configuration :
Version : Super Ring
Priority : 128
Ring Port : fa1, fa2
Path Cost : 100, 200
Dual-Homing II : Disabled
Statistics :
Watchdog sent 0, received 0, missed 0
Link Up sent 0, received 0
Link Down sent 0, received 0
Role Transition count 0
Ring State Transition count 1
Ring ID is optional. If the ring ID is typed, this command only
displays the information of the target Ring.