Comtrol ES8510-XT - Manual (Page 140)

140 - Basic Settings (CLI) RocketLinx ES8510 and ES8510-XT User Guide: 2000513 Rev. H
Configuration Using the Command Line Interface (CLI)
Time Setting (Continued)
Display
Switch # sh ntp associations
Network time protocol
Status: Disabled
Primary peer: N/A
Secondary peer: N/A
Switch # show clock
Sun Jan 1 04:14:19 2006 (GMT) Greenwich Mean Time: Dublin,
Edinburgh, Lisbon, London
Switch # show clock timezone
clock timezone (26) (GMT) Greenwich Mean Time: Dublin,
Edinburgh, Lisbon, London
DHCP Server
DHCP Server configuration
Enable DHCP Server on ES8510 Switch
Switch#
Switch# configure terminal
Switch(config)# router dhcp
Switch(config-dhcp)# service dhcp
Configure DHCP network address pool
Switch(config-dhcp)#network 50.50.50.0/4 -(network/mask)
Switch(config-dhcp)#default-router 50.50.50.1
Lease time configure Switch(config-dhcp)#lease 300 (300 sec)
DHCP Relay Agent
Enable DHCP Relay Agent
Switch#
Switch# configure terminal
Switch(config)# router dhcp
Switch(config-dhcp)# service dhcp
Show DHCP server
information
Switch# show ip dhcp server statistics
DHCP Server ON
Address Pool 1
network:192.168.17.0/24
default-router:192.168.17.254
lease time:300
Excluded Address List
IP Address
---------------
(list excluded address)
Manual Binding List
IP Address MAC Address
--------------- --------------
(list IP & MAC binding entry)
Leased Address List
IP Address MAC Address Leased Time Remains
--------------- -------------- --------------------
(list leased Time remain information for each entry)