Comtrol UP DeviceMaster Installation - Manual (Page 75)

Hardware Installation and Configuration Guide: 2000451 Rev. J Hardware Specifications - 75
Hardware Specifications
2-Port (DB9) This table provides the specifications to purchase a power supply for a
DeviceMaster UP 2-port 1E/2E model with serial terminal connectors.
4-Port This table provides the specifications for the
power supply shipped with the DeviceMaster UP
4-port.
This table provides the specifications, if you intend on using your own power
supply.
External Power Supply: 2-Port
(Serial Terminal Connectors) 6-30VDC
Output voltage†
Current†
Power
6-30VDC
100 mA (Min) @ 24VDC
2.5 W
† Any power supply that meets current consumption, voltage,
power, and connector pinouts requirements can be used.
Signal
Ground† Chassis
Ground†
Positive† Return†
Comtrol Power Supply: 4-Port
Input line frequency
Input line voltage
Output voltage
Output current
47 - 63 Hz
90 - 260 VAC
24VDC
500 mA @ 24VDC
External Power Supply: 4-Port
Output voltage†
Current†
Power
9-30VDC
200 mA (Min) @ 24VDC
4.8 W
† Any power supply that meets current consumption, voltage,
power, and connector pinouts requirements can be used.
+VDC
V Return - GND
Shield GND
Housing Molex P/N:
39-01-4030
Pins Molex P/N:
44485-1211