Telephone answering system connection – Brother FAX-2000P User Manual

Page 83

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Telephone Answering System Connection

The FAX-2000P can be connected to a telephone answering system
which operates in Ans./Fax Ready mode. To use the answering system,
the following settings are required.

• Ano/Fax Ready mode

Use the AUTO/MANU RECEIVE key to set the mode.

• Answering System Connection

Normally, an external telephone is to be connected to PHONE 2 jack.
Use the setting menu to set the machine for connecting the answering
system to PHONE 2.

• Silence Detection Time

In the Ans./Fax Ready mode, the answering system will capture an
incoming cal! if the fax signal (CNG) is not detected. However, the line

will be switched from the answering system to your FAX when silence

continues for a certain time interval. The time interval can be set
between 0 and 15 seconds.

• External Telephone Connection

Call up the setting menu to set the FAX machine for connection to an

external telephone.