How to set the home position for contrast, In standby mode, press function, 0, 9 and enter, Press 1,1 and enter – Brother FAX-2000P User Manual
Page 130: How to set the halftone mode, Press2,sand enter, Howto set the home position for contrast, Parameters for image scanning
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Parameters for Image Scanning
How to Set the Home Position for Contrast
Change the initial contrast condition displayed in the LCD from Norm to
Dark or Light.
In standby mode, press FUNCTION, 0, 9 and ENTER.
Press 1,1 and ENTER.
Select Norm(al), Dark or Light using the SELECT key,
then press ENTER.
9 .User Settings
01-12
Enter/Select
l.Set Phone Type
01-25
Enter/Select
11 .Set Contrast
01-25 Enter/Select
Original:
Norm
Enter/Select
How to Set the Halftone Mode
Select one of the two halftone modes used for copying and transmission
in the Gray specification.
In standby mode, press FUNCTION, 0, 9 and ENTER.
u
Press2,Sand ENTER.
Select Grayscale 1 or 2 using the SELECT key, then press
ENTER.
9.User Settings
01-12 Enter/Select
l.Set Phone Type
01-25 Enter/Select
23.Set Grayscale
01-25 Enter/Select
Grayscale 1
Enter/Select
Grayscale 1 •. Characters are legible. (For catalogue)
Grayscale 2; Tones are highly reproducible. (For
photograph)
118