Brother FAX-2000P - Manual (Page 139)

Message Display Explanation, and action to be taken
Close XMIT cover The operation panel is open.
^ Open the panel once, then close it again firmly,
Close top cover The top cover is open.
^ Open the cover once, then dose it again firmly.
Check lamp There is insufficient light from the lamp of the document
reader or lamp malfunction.
^ Turn ON/OFF the power, then check again if the lamp
glows.
Contact your Brother service personnel.
Oi iginal in use • The COPY or FUNCTION key is pressed while ADF
transmission has already been registered.
• The command has been used.
^ Press the STOP button to discharge the documents from
the ADF, or repeat the operation when the operation
currently waiting is completed, or cancel the registration.
Memory overflow • Memory capacity is exceeded during an attempt to store
documents in memory, causing document reading to
stop automatically.
1®“ For memory transmission, press ENTER to register
documents in memory, and to complete the operation. If
CANCEL is pressed, or if no instruction is given for one
minute the documents already in memory will be
cancelled, and standby will resume.
127