Brother FAX-2000P - Manual (Page 76)

Receiving Documents
As previously described in the section of "Preparing Your Facsimile”, the FAX-2000P has the following four
reception modes:
• Fax Ready
• Tel/Fax Ready
• Ans/Fax Ready
• Tel Ready
In modes other than "Tel Ready", the AUTO RECEIVE indicator lights and messages from facsimiles can be
received automatically. This reception mode is called the automatic reception mode. On the contrary, in the
Tel Ready mode, an incoming call is not accepted by your machine even if the call is from a facsimile.
Therefore, it is necessary to pick up the handset and to press START in order to receive a message. This
reception mode is called the manual reception mode.
Automatic Reception When your machine receives a call from the transmitting side, a ring tone
Mode sounds the number of times previously set. (Initial value is twice).
The LCD then display the following message sequence:
Fax Ready
Mar 1,91 10:10
(Ringing)
Called
(Cal! arrived)
2031112222
Recei ve Norm
(During reception)
A FAX numeric ID is indicated in the upper row, and the resolution in the lower
right position of the LCD during reception.
The control panel returns to the standby mode when all received pages are
printed.
64