Brother FAX-2000P - Manual (Page 69)

Sending Documents
Placing documents Place document face down on the ADF tray and adjust the document guides
on the ADF tray to the document width. When you send multiple-sheet document, form the
document into featheredged shape.
The control panel LCD will display the message.
Fax Ready
A4 Norm Norm
The above message indicates that the facsimile is ready to send or copy a
document.
As long as some pages remain on the ADF tray, pages can be. added to
the stack even while documents are being sent or copied. However, the
total number of pages on the tray must not exceed 30.
Dialing You can use the following methods to dial a remote facsimile number from your
machine.
• One-touch dialing
• Abbreviated (2-digit) dialing
• Full number (keypad) dialing
One-touch dialing
With this method, press only one key to activate dialing of a facsimile number
assigned to that key. The number of the remote facsimile must be preset
beforehand.
Abbreviated dialing
With this method, press ABBR plus two numeric keys and START to dial a
facsimile number assigned to these keys. The number of the remote facsimile
must be preset beforehand.
Full number (keypad) dialing
With this method, dial the full number of the remote facsimile using the number
.keypad.
Group dialing
Group number(s) can be used to specify parties, abbreviated dials and
one-touch dials for broadcasting or sequential polling. All abbreviated dials
and/or one-touch dials having the specified group number will be used for
dialing. This is calied group dialing.
57