Brother FAX-2000P - Manual (Page 75)

Sending Documents
4
To turn off the auto-print function, select Off, and press
ENTER.
Even if the RCR is selected, TCR will be printed out if
the other party is not a FAX-2000R
Redialing If a line is busy or if there is no answer, the Brother FAX will automatically redial
the number twice, with a three-minute pause dialing. The following two
messages appears alternately.
Fax Ready
Mar 01,91 1 0 : 1 0
Mar 01,91 10:13
Mar 01,91 10:10
Automatic redialing takes place when dialing a facsimile number, but not when
dialing a telephone number.
Automatic redialing is cancelled when you remove the documents placed on the
ADF.
Manual Redial
To manually redial the last number dialed, press REDIAL and START. Note that
you cannot perform this function while your Brother FAX is in an auto-redial
pause.
i^l Chain dialing
Chain dialing is an advanced technique for dialing. With this method, you
can combine abbreviated dialing with additional abbreviated dialing or with
keypad dialing or one-touch dialing.
For example, assume that the ABC company has different facsimiles for
different departments and they are identified by the last three digits as
shown below:
General affair 203-111-2222-001
Engineering 203-111-2222-002
In this case, store the number, except for the last three digits, under an
abbreviated dial, and specify the last three (3) digits by another
abbreviated dial or by the keypad.
Note that a one-touch key must be pressed last when you use one-touch
dialing for chain dialing.
Chain dialing cannot be used for broadcasting and sequential polling.
63