How to set a communication mode, In standby mode, press function, 1, 0 and enter, Press select – Brother FAX-2000P User Manual

Page 63: Press enter

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Storing Frequently Used Communication Modes Under One^uch Program Keys

How to Set a Communication Mode

In standby mode, press FUNCTION, 1, 0 and ENTER.

10.Program One-touch

01-12 Enter/Sel ect

1.Enter One-touch

1-5 Enter/Select

Press SELECT.

2. Program One-touch
1-5 Enter/Sel ect

Press ENTER.

Program Key PI to P6

Select and Press

Press a one-touch program key (P1~>P6).

(Example) Program Key P1

( W h e n n o t p r o g r a mm e d )

[Pl]=Not Stored

Enter/Select

( W h e n p r o g r a m m e d )

[Pl]=Delayed XMIT

Enter/Select

a. If the key has not yet been programmed, press ENTER

for the newly programmed communication mode.

If you press SELECT at this time, the control panel returns

to the display of step 3.

b. If the key has already been programmed, press

CANCEL to change the communication mode.

If you press SELECT at this time, the control panel returns

to the display in step 3.

1.Delay Transmission

1-5 Enter/Select

1.Delay Transmission
1-5 Enter/Select