Brother FAX-2000P - Manual (Page 51)

Storing Frequently Used Fax Numbers Under Abbreviated Dials
4
a. When a number has not yet been stored, press ENTER
to store a new number.
If you press SELECT at this time, the control panel returns
to the display in step 2.
( O l ) T e l . N u m b e r
b. When a number has already been stored, press
CANCEL to change the number.
If you press SELECT at this time, the control panel
displays the party name entry mode (step 6).
( 0 1 ) T e 1 . N u m b e r
Enter a facsimile number from the keypad, and press
ENTER. Up to 40 digits can be stored including dashes
{-), pauses, etc.
Keypad (0-9)
;
Dash {-) Key
PAUSE Key :
TONE Key :
CANCEL Key :
Numeric entry
Dash mark entry or dial tone
detection.
Press once..............entry. Ignored
when dialing.
Press twice............. entry to check
dial tone.
Pause (5 sec) entry. is displayed
in LCD.
Switching from pulse signal to tone
is displayed in LCD.
Deletes the last digit in LCD.
( 0 1 ) = T e l . N u m b e r
2 0 3 - 1 1 1 - 2 2 2 2
(When no name stored)
( 0 1 ) = N a m e
E n t e r / S e l e c t
(When name stored)
C 0 1 ) = B R 0 T H E R
S e l e c t / C a n c e l
39