Setting the dialing signal (pulse/tone), In standby mode, press function, 0,9 and enter, Press enter – Brother FAX-2000P User Manual

Page 48: Setting the dialing signal (puise/tone)

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Setting the Dialing Signal (Pulse/Tone)

This setting allows you to select the dialing signal in accordance with the
type of line you subscribe to.

In standby mode, press FUNCTION, 0,9 and ENTER.

9 . U s e r S e t t i n g s

0 1 - 1 2 E n t e r / S e l e c t

1 . S e t P h o n e T y p e

0 1 - 2 5 E n t e r / S e l e c t

Press ENTER.

R o t a r y L i n e

E n t e r / S e l e c t

a. Press ENTER for connecting to a rotary pulse line.

b. Press SELECT, then press ENTER for connecting

to a PB tone line.

T o n e L i n e

E n t e r / S e l e c t

How to verify the correct setting.

• Pick up the handset. You will hear a dial tone

through the earpiece.

• Press any number on the keypad.

•

Then dial tone should stop.